Vanden Plas (X308) V8-4.0L (AJ27) (2000)
Console: Service and Repair
Center Console
Removal and Installation
CENTRE CONSOLE
Removal
1. Turn ignition switch to position II and apply footbrake.
2. Move gear selector to the the 'D' position, and release footbrake.
3. Turn ignition switch to position 'O'.
4. Remove battery cover and disconnect ground cable from battery terminal.
5. Where fitted, remove centre console rear extension. See: Centre Console Rear Extension
6. Remove fascia centre veneer panel.
7. Using a thin plastic lever, carefully release the rear air distribution control grill tangs at top and sides and remove grill complete with veneer panel
and control.
8. Disconnect cigar lighter and ashtray illumination harness (white) multiplug at RH rear, of console.