Vanden Plas (X308) V8-4.0L (AJ27) (2000)
5. Fit plastic securing ring to barrel and rotate to engage locking tangs.
6. Fit bias spring to operating arm ensuring it is fully seated and tensioned, with ends positioned each side of pillar.
7. Fit operating arm and bias spring assembly to barrel and secure with 'C' clip.
8. Fit lock barrel assembly to housing.
9. Position lock assembly in handle and fit and tighten securing screw.
10. Fit key and check lock function.
11. Remove key from lock.
12. Fit handle and lock assembly to glovebox lid.