Vanden Plas (X308) V8-4.0L (AJ27) (2000)
Sun Visor: Service and Repair
Sun Visor
Sun Visor (76.10.48)
Removal
1. Remove battery cover and disconnect ground cable from battery terminal.
2. Release sun visor from support and turn downwards.
3. Supporting the sun visor, slacken and remove the three screws securing the mounting to the header.
4. Disconnect the harness multiplug situated behind the headlining and remove the sun visor.
5. Slacken and remove screw securing sunvisor support, and remove support from header.
Installation
1. Position sun visor at header.
2. Connect multiplug and position it behind headlining.
3. Correctly position and firmly seat sun visor mounting on header and fit and tighten securing screws.
4. Position sun visor support at header and fit and tighten securing screw.
5. Connect ground cable to battery terminal and fit battery cover.