Vanden Plas (X308) V8-4.0L (AJ27) (2000)
B-Pillar Trim Panel (76.13.28)
Removal
1. Position front seat and squab fully forward.
2. Remove front seat belt upper and lower anchorages.
3. Remove escutcheon from trim pad aperture and seat belt.
4. Remove draught welts from adjacent door aperture flanges.
5. Using a trim removal tool and exercising care to avoid damage, remove and discard the two fir tree fasteners from bottom of trim.
6. Carefully ease centre of trim pad inwards to release four spring clips.
7. Pass seat belt and fittings through trim pad aperture.