Vanden Plas (X308) V8-4.0L (AJ27) (2000)
Power Seat Control Module: Service and Repair
Removal
1. Power steering column to fully forward position. (Driver side only)
2. Power seat to fully forward and upward position.
3. Remove battery cover and disconnect ground cable from battery terminal. See: Starting and Charging/Battery/Battery Cable/Negative/Service and
Repair
WARNING: FOLLOWING DISCONNECTION OF THE BATTERY A PERIOD OF AT LEAST ONE MINUTE MUST BE
ALLOWED TO ELAPSE BEFORE WORKING ON A FRONT SEAT WITH A SIDE AIRBAG FITTED.
4. Slacken and remove seat rear securing bolts.
5. Slacken and remove seat front securing bolts.
6. With assistance and exercising care to avoid tensioning harness, tilt seat backwards and support for access.