Vanden Plas (X308) V8-4.0L (AJ27) (2000)
3. Release back finisher upper fir tree fasteners and remove back finisher from seat.
Installation
1. Fit and align back finisher to seat.
2. Fully seat back finisher upper securing studs.
3. Position and fully seat finisher side securing clips.
4. Fit and tighten the two back finisher lower securing screws.
Veneer Panel, Daimler and Vanden Plas Models
Removal
1. Remove screws securing picnic tray hinges to seat back finisher and remove tray from seat.