Vanden Plas (X308) V8-4.0L (AJ27) (2000)
4. Remove trim securing screws and remove trim from veneer panel.
Installation
1. Position trim on veneer panel and install trim securing screws.
2. Install clips at hinge center securing screw positions.
3. Position hinges on veneer panel and install securing screws.
4. Position hinges on seat back finisher and install securing screws.
Top Rail Veneer Panel, Daimler and Vanden Plas Models
Removal
1. Move picnic tray to fully down position.
2. Remove screws securing picnic tray hinges to back finisher and remove tray from seat.