Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-1286004.png)
10. Reposition cushion cover sides, lift and hold cushion pad for access to rear of seat switch and disconnect harness multiplug.
11. Remove seat switch.
-
Release seat switch pack upper retaining tangs.
-
Release switch pack lower retaining tangs adjacent to seat runners and remove switch.
12. Slacken and remove the three switch pack mounting bracket to seat frame securing screws.
13. Remove cushion cover/cushion pad assembly from seat frame.
14. Remove staples securing cover to seat switch mounting bracket.
15. Fold cushion sides inwards for access and remove cushion cover to cushion pad hog rings.
