Vanden Plas (X308) V8-4.0L (AJ27) (2000)
Seat Cover: Service and Repair
Removal and Installation
Powered Front Seat, Cushion Cover
Removal
1. Remove battery cover and disconnect ground cable from battery terminal. See: Starting and Charging/Battery/Battery Cable/Negative/Service and
Repair
WARNING: FOLLOWING DISCONNECTION OF THE BATTERY A PERIOD OF AT LEAST ONE MINUTE MUST BE
ALLOWED TO ELAPSE BEFORE WORKING ON A FRONT SEAT WITH A SIDE AIRBAG FITTED.
2. Remove front seat from vehicle. See: Service and Repair
3. Remove seat back finisher. See: Seat Back/Service and Repair
4. Remove the six cushion cover to seat frame retaining clips.
5. Release cushion cover retaining strip from rear of seat frame.