Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-1287011.png)
11. Invert cushion assembly, fully seat cover center panel overlap plastic edge fastener on frame and secure with two hog rings
12. Ensuring even tensioning, secure outer edges of cover and cushion to frame using hog rings.
13. Position cover at seat belt anchor apertures and secure each with eight hog rings.
14. Fit rear seat cushion to vehicle. See: Seat Cushion/Service and Repair
15. Fit rear heel boards.
Rear Seat Squab Cover
Removal
1. Remove rear heel boards.
