Vanden Plas (X308) V8-4.0L (AJ27) (2000)
16. Fit and fully seat headrests in guide tubes and fit securing clips.
17. Fit rear seat squab.
18. Fit rear seat belt escutcheons.
19. Fit rear seat cushion.
20. Fit rear heel boards.
Rear Seat Cushion Cover
Rear Seat Cushion Cover (76.70.47)
Removal
1. Remove rear heel boards.
2. Remove rear seat cushion.
3. Place seat cushion inverted on clean work surface.
4. Remove and discard the eight hog rings securing cover at each seat belt anchor aperture.
5. Remove and discard hog rings securing outer edges of cover and cushion to frame.
6. Remove and discard two hog rings securing centre panel overlap plastic edge fastener and release fastener from frame.