Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-1299002.png)
1. Fit and fully seat slide to potentiometer/gearbox assembly.
2. Position motor frame on slide assembly and secure with new pop rivets.
3. Connect seat cushion tilt motor drive cables.
4. Secure seat harness in clips.
5. Position slide assembly on seat.
6. Fit and align RH seat belt buckle mounting bracket between slide and seat pivot bracket and fit but do not tighten securing bolts.
7. Fit and align LH seat belt anchor bracket between slide and seat pivot bracket and fit but do not tighten securing bolts.
8. Fit but do not tighten RH and LH slide front securing bolts.
9. Finally tighten slide front and rear securing bolts.
10. Fit front seat to vehicle.
