Vanden Plas (X308) V8-4.0L (AJ27) (2000)
Seat Track: Service and Repair
Removal and Installation
Removal
1. Remove battery cover and disconnect ground cable from battery terminal. See: Starting and Charging/Battery/Battery Cable/Negative/Service and
Repair
WARNING: FOLLOWING DISCONNECTION OF THE BATTERY A PERIOD OF AT LEAST ONE MINUTE MUST BE
ALLOWED TO ELAPSE BEFORE WORKING ON A FRONT SEAT WITH A SIDE AIRBAG FITTED.
2. Remove front seat from vehicle. See: Service and Repair
3. Invert seat for access.
4. Slacken and remove LH slide securing bolts and remove seat belt anchor mounting bracket.
5. Slacken and remove RH slide securing bolts and remove seat belt buckle mounting bracket.