Vanden Plas (X308) V8-4.0L (AJ27) (2000)
3. Install brake pads into caliper housing. (See Caution above).
Remove paper backing from pads to reveal adhesive shim.Install brake pads, insert clip located on back of inner pad into caliper piston.
4. Install caliper housing to caliper carrier.
Align housing to carrier.
Install and tighten guide pins to 25 - 30 Nm
Install dust covers.
Install anti-rattle spring.
5. Connect brake hose to caliper housing.
Remove plugs.
Install and tighten bolt to 30 - 40 Nm.
6. Remove special tool from brake pedal.
7. Fit wheels.
8. Remove stands and lower vehicle.
9. Bleed brake hydraulic system. See: Hydraulic System
Caliper - Brembo Brakes
Special Service tools