Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-752003.png)
7. Remove brake carrier from vertical link. Remove bolts. Remove carrier.
8. Withdraw brake disc from hub.
9. Repeat above procedure to remove opposite side brake disc.
10. Remove brake dust from calipers and clean mating surfaces, see WARNING above.
11. Thoroughly clean the area of the hubs where they mate against the brake discs.
Installation
1. Install brake disc to hub.
2. Check brake disc run-out.
