Vanden Plas (X308) V8-4.0L (AJ27) (2000)
13. Install caliper to vertical link. Install and tighten bolts to 140 Nm.
14. CAUTION:
^Retracting the caliper piston may cause the fluid reservoir to over-flow. Remove brake fluid spillage immediately from paint work, with clean
water.
^
Note the condition of pins and 'R' clips and replace if necessary.
Install brake pads into caliper housing.
Slowly retract caliper pistons.
Install pads.
Position anti-rattle spring.
Install pins.
Install 'R' clips.
15. Install wheels.