Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-758006.png)
Remove plug from port and slowly retract piston into caliper housing.
Remove paper backing from pads to reveal adhesive shim.Install brake pads, insert clip located on back of inner pad into caliper piston.
3. Install caliper housing to caliper carrier.
Align housing to carrier.
Install and tighten guide pins to 25 - 30 Nm.
Install dust covers.
Install anti-rattle spring.
4. NOTE: The brake hose must only be installed with the vehicle's body supported and the suspension hanging.
Install and tighten brake hose to caliper housing to 10 - 14 Nm.
