Vanden Plas (X308) V8-4.0L (AJ27) (2000)
8. Disconnect brake hose from brake tube.
Unscrew brake tube union nut.
Remove nut from hose.
Remove hose from bracket.
Fit plugs to brake tube and hose.
9. Release brake hose from caliper.
Remove union bolt.
Remove and discard sealing washers.
Install plugs into caliper and hose.
10. Remove brake pads from caliper.
Remove'R'clips.
Withdraw pins from caliper.
Remove anti-rattle spring.
Remove brake pads.