Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-783002.png)
6. Remove rear shoe retaining pin.
Align hub access hole with retaining pin.
Turn pin until it releases from backing plate.
7. Remove brake shoes from parking brake lever-mechanism and remove shoes from vehicle.
8. Remove return springs from shoes.
Remove upper return spring.
Remove lower return spring.
9. Remove brake dust and clean components, see WARNING above.
10. Repeat procedure to remove parking brake shoes on opposite side of vehicle.
Installation
