Vanden Plas (X308) V8-4.0L (AJ27) (2000)
Lubricate adjuster mechanism with appropriate grease.
Move front shoe forwards.
Install adjuster assembly.
4. NOTE: Make sure retaining pin is sealed correctly in backing plate.
Install front shoe retaining pin.
Align hub access hole.
Install retaining pin.
5. Make sure brake shoes are seated correctly in adjuster and lever mechanism.
6. Repeat procedure to install parking brake shoes on opposite side of vehicle.
7. Install both rear brake discs. See: Disc Brake System
8. Set parking brake. See: Adjustments
9. Fit rear wheels.
10. Remove stands and lower vehicle.