Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-365001.png)
Radiator Cooling Fan Motor: Service and Repair
Fan and Motor Unit
Removal
1. Remove the Twin Fan and Motor Assembly.
2. Remove the fan and motor unit from the twin fan and motor assembly.
Remove the three nuts, which secure the fan and motor unit.
Remove the fan and motor unit.
3. Remove the fan rubber mountings.
Remove the spacer from each rubber mounting.
Remove the three rubber mountings.
Installation
1. Installation is the reverse of the removal procedure.
