Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-266016.png)
21. Install the VVT bush carrier to the cylinder block.
Lubricate the seals and the bush.
Install the bush carrier assembly.
Check that the ring dowels are engaged squarely.
Fully locate the assembly as much as possible by hand pressure.
Install the three securing bolts.
Tighten to 19 - 23 Nm.
22. Install new seals to the VVT bush carrier, Bank 2.
Install the new sealing rings to the carrier bush groove.
