Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-307009.png)
7. Install the oil pan gasket to the oil pan body assembly.
Insert the seal into the locating positions in the groove, working around from a corner.
Press in the remainder of the seal, following the same procedure.
8. Install the oil pan to the oil pan body.
Position and align the oil pan.
Install, but do not tighten, all eighteen bolts, which secure the oil pan.
9. Tighten the bolts to the correct torque figure 11-13 Nm, in the sequence indicated.
Tighten the drain plug to 30-40 Nm.
