Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-316006.png)
19. Detach the left-hand CMP sensor wiring harness from the throttle body elbow.
20. Disconnect the knock sensor (KS) electrical connectors.
21. NOTE: Left-hand shown, right-hand similar.
Disconnect the fuel injectors electrical connectors.
22. NOTE: Place an absorbent cloth underneath fuel connection to absorb any spillages.
NOTE: Cap the fuel line and fuel injection supply manifold to prevent contamination.
Disconnect the fuel feed hose.
Disconnect the fuel feed hose at the Quick Fit connector, using special tool 310 - 044.
