Vanden Plas (X308) V8-4.0L (AJ27) (2000)
2. Install eight new seals to the intake manifold ports.
3. Install the intake manifold.
Tighten to 21 Nm.
4. Connect the engine breather hose to the throttle body elbow.
Connect the vacuum hose to the throttle body elbow.
Connect the engine breather hose from the throttle body elbow.
5. NOTE: Uncap the fuel line and fuel injection supply manifold.
NOTE: Remove and dispose of absorbent cloth whilst complying to local health and safety standards.
Connect the fuel feed hose.
Connect the fuel feed hose at the Quick Fit connector. Ensure that the hose is fully seated to the feed pipe.