Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-316010.png)
10. Connect the throttle body electrical connectors.
11. Connect the accelerator inner cable.
Reposition the accelerator pulley to the full throttle position.
Connect the accelerator inner cable.
12. NOTE: Uncap the coolant hose.
Connect the coolant hose to the throttle body.
13. NOTE: Right-hand shown, left-hand similar.
Install the intake elbow lower retaining bolts.
Tighten to 18 Nm.
