Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-320003.png)
14. Disconnect the intake tube from the throttle body.
Remove the two bolts which secure the intake tube to the throttle body.
Disconnect the intake tube from the throttle body.
15. Disconnect the air cleaner cover.
Release the five clips which secure the air cleaner cover.
16. Disconnect the air flow meter multi-plug.
17. Remove the intake tube / air flow meter / air cleaner cover assembly.
Remove the intake tube / air flow meter / air cleaner cover assembly.
Remove and discard the rubber seal; air intake tube to throttle body.
18. Remove the purge valve, from the evaporative control system.
19. Remove the on-plug ignition coils.
