Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-320006.png)
27. Remove and discard the inner and outer seals from the timing cover.
Remove the seal from the inner groove on the face of the timing cover.
Remove the seal from the outer groove on the face of the timing cover.
Check the condition of the oil seal and renew as necessary.
28. Clean all parts and mating faces.
Installation
1. Install new seals to the timing cover.
Install and fully locate a new seal to the inner groove on the face of the timing cover.
Install and fully locate a new seal to the outer groove on the face of the timing cover.
