Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-327009.png)
31. Note the orientation of the sprockets relative to each other (half a tooth out of line).
32. Remove the sprocket from the crankshaft.
To remove the Bank 2 sprocket, the Bank 1 sprocket must be removed first.
33. Clean and inspect all relevant components.
Installation
1. Fit the sprockets to the crankshaft.
The teeth of Bank 1 and Bank 2 sprockets on the crankshaft must be out of phase with each other.
If they are in-phase after fitting, remove the Bank 1 sprocket, turn it on its vertical axis and refit it.
