Vanden Plas (X308) V8-4.0L (AJ27) (2000)
securing bolt in two stages.
First to 30 - 40 Nm and then finally to 85 - 90 Nm.
Remove the chain tensioning tool and the wedge(s).
8. Remove the camshaft locking tool 303-530 and transfer it to Bank 1 camshafts, aligning the shafts slightly as necessary.
9. Install the chain tensioning tool 303-532 to the exhaust camshaft sprocket, Bank 1.
Reposition the sprocket (and the VVT unit) for the most advantageous position for use of the tool.
Remove the tool.