Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-328005.png)
15. Remove the damper securing bolt from the crankshaft.
16. Lower the vehicle on the ramp.
17. Install the camshaft locking tool 303-530 to Bank 1 camshafts, aligning the shafts slightly as necessary.
18. Loosen the bolt which secures the sprocket to the camshaft.
19. Loosen the bolt which secures the VVT unit to the camshaft.
