Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-961002.png)
5. Remove and discard the veneer panel to fascia securing clips.
Installation
1. Fit and fully seat new veneer panel securing clips to fascia.
2. Position center veneer panel on fascia, align dowels with clips and press firmly at edges to fully seat.
3. Fit major gauge module veneer panel. See: Instrument Panel, Gauges and Warning Indicators/Instrument Cluster / Carrier/Service and
Repair/Procedures
4. Using new retaining clips, fit and fully seat passenger airbag deployment door.
5. Connect ground cable to battery terminal and fit battery cover. See: Starting and Charging/Battery/Service and Repair
