Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-974006.png)
-
Discard O-ring seal.
-
Install suitable blanking plugs.
Installation
1. If necessary, renew radiator top and bottom foam sealing strips.
2. If previously removed, install condenser to receiver/drier line at condenser.
-
Remove blanking plugs.
-
Install new O-ring seal and lubricate with clean compressor oil.
-
Install bolt (8 - 10 Nm).
-
Locate hose to clip.
