Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-981002.png)
5. Remove the BPM
1. Remove the fixings (3), BPM to fascia reinforcement
2. Remove the BPM
6. Slacken the A/CCM upper fixing using a 'Snap-On SDP 11 stubby screwdriver, or similar
7. Remove the A/CCM
1. Remove the lower fixings (2) A/CCM to heater/cooler case
2. Reposition the A/CCM to disconnect (4) multiplugs
Installation
1. Installation is the reverse of the removal procedure
