Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-991007.png)
22. Remove heater/cooler assembly from vehicle.
-
Guide matrix heater pipe stubs through firewall grommet and remove assembly.
Installation
1. Install heater/cooler assembly into vehicle.
-
Guide matrix heater pipe stubs through firewall grommet.
-
Position heater/cooler assembly against firewall.
2. Install heater/cooler assembly fixings.
-
Install upper fixing nuts.
-
Install lower fixing nut.
