Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-1352001.png)
Center Mounted Brake Lamp Bulb: Service and Repair
Bulb - Stop Lamp - High Mounted
Removal
1. Remove cover from stop lamp.
1. Depress two tangs at base of lamp cover and withdraw cover.
2. Remove lamp module.
1. Release spring clips at each end and remove lamp module from carrier.
3. CAUTION: Exercise care to avoid contact with reflective surfaces.
Withdraw lens and remove relevant bulb from module.
Installation
