Vanden Plas (X308) V8-4.0L (AJ27) (2000)
10. Reconnect the trunk harness connections.
If fitted, connect the wiring to the accelerometer.
Connect the wiring to the fuel level sensor harness.
Connect the wiring to the fuel pump connector.
If fitted, connect the wiring to the pressure sensor connector.
11. Reconnect the lefthand side trunk harness if it has been necessary to move it for access. Route the harness behind both the filler tube and breather
or pressure relief pipe.
Fit the harness securing clip to the mounting bracket.
Connect the fuel flap lock actuator connector.
Connect the lefthand rear lamp harness connector.
If applicable, feed the side marker lamp harness through the access hole in the floor and reseat the sealing grommet.
On the underside of the vehicle, fit the side marker lamp connector and fix the harness to the securing clips.