Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-543002.png)
6. Remove the intake tube / air flow meter / air cleaner cover assembly.
Remove the intake tube / air flow meter / air cleaner cover assembly.
Remove and discard the rubber seal; air intake tube to throttle body.
Installation
1. Install the intake tube / air flow meter / air cleaner cover assembly.
Position the intake tube / air flow meter / air cleaner cover assembly.
Install a new rubber seal and position the air intake tube to the throttle body.
2. Connect the intake tube to the throttle body.
Install a new seal and connect the intake tube to the throttle body.
Install the two bolts which secure the intake tube to the throttle body. Tighten to 4 - 5 Nm.
