Vanden Plas (X308) V8-4.0L (AJ27) (2000)
Door Module: Service and Repair
Front Door Control Module
Removal
1. Disconnect battery ground cable; Refer to 'Battery, Battery Cable.' See: Starting and Charging/Battery/Battery Cable/Negative
2. Remove door casing; Refer to 'Body and Frame, Doors, Hood and Trunk, Door.' See: Body and Frame/Doors, Hood and Trunk/Doors/Front
Door/Front Door Panel/Service and Repair
3. Remove primary water shedder.
Displace primary water shedder from door.
Feed door harness through water shedder.
Remove water shedder.