Vanden Plas (X308) V8-4.0L (AJ27) (2000)
Installation
1. Fit securing bolts, spacers and fibre washers to height adjuster.
2. Position adjuster on 'B' post and fit and tighten securing bolts.
3. Fit 'B' post trim pad. Refer to 'Body and Frame, Interior Trim, Trim Panel.' See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and
Repair
4. Fit seat belt upper anchor.
5. Connect ground cable to battery terminal and fit battery cover. Refer to 'Battery, Service and Repair, Battery Reconnection Procedure.' See:
Starting and Charging/Battery/Service and Repair