Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-891009.png)
Position steering rack for access.
Pivot steering arm fully downwards
Remove steering rack securing bolts.
Carefully move steering rack downwards for access to wishbone eccentric bolt.
29. Remove lower wishbone rear arm eccentric bolt and nut.
Mark position of eccentric bolt large graduation mark on crossbeam.
Remove wishbone rear eccentric bolt and nut.
30. Remove lower wishbone rear arm/ball joint assembly from crossbeam.
Installation
1. Position wishbone rear arm on crossbeam and install but do not tighten eccentric bolt.
