Vanden Plas (X308) V8-4.0L (AJ27) (2000)
27. Position and partially tighten wishbone front eccentric bolt.
Rotate eccentric bolt to align large graduation with mark made during removal.
Partially tighten bolt.
28. Fit road wheel.
29. Raise vehicle, remove stands and lower vehicle onto road wheels.
30. Ensuring graduation mark remains aligned, finally tighten wishbone rear eccentric bolt to 113 - 153 Nm.
31. Ensuring graduation mark remains aligned, finally tighten wishbone front eccentric bolt to 113 - 153 Nm.
32. Carry out steering geometry and wheel alignment checks and if necessary adjust.
Wishbone Bush - Upper