Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-893022.png)
4. Rotate stem of special tool 204-114 to locate dowel in suspension turret slot.
5. WARNING: WHEN TIGHTENING TOOL NUT, USE LOWER DOWEL AS A GUIDE TO ENSURE THAT THE TOOL STEM DOES
NOT ROTATE AND DISTURB POSITION OF DOWEL IN SUSPENSION TURRET.
Fully tighten nut of special tool to achieve suspension mid-laden position.
6. Raise front of vehicle and support on stands.
7. Remove appropriate road wheel.
8. Remove tiestraps securing wheel speed sensor harness to upper wishbone.
9. Move steering to appropriate full lock for access to suspension.
