Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-897009.png)
Install four bolts securing mounting to crossbeam and tighten to 22 - 28 Nm.
Install front mounting heatshield.
2. NOTE: It may be necessary to use a hammer and drift to finally align new mounting with body location.
Carefully raise crossbeam assembly into position.
Ensure that dowels of both crossbeam mountings are correctly seated in body locations.
3. Ensure that both engine hydramounts are correctly seated in crossbeam locations.
