Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-897017.png)
12. Remove and discard tiestrap securing undertray to body brace.
13. At each side of vehicle, remove and discard scrivet securing undertray to wheelarch liner.
14. Remove undertray from vehicle.
15. Position camber tie down special tool 204-114 on suspension.
Fully slacken tool adjuster nut.
Position tool in road spring and pass upper dowel through slot in suspension turret.
16. Lower front of vehicle.
