Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-897019.png)
22. Remove crossbeam to engine Hydramount securing bolts.
Remove bolt securing Crossbeam to Hydramount.
Fully withdraw bolt into Crossbeam insert.
Repeat procedure to remove and withdraw bolt on opposite side
23. Remove lower nut and bolt from front shock absorber.
Repeat procedure to remove bolt from opposite side shock absorber.
24. Slacken but do not remove crossbeam rear nuts.
Slacken crossbeam LH rear mounting nut.
