Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-897026.png)
Slacken hook adjustment nuts until weight of engine is released.
Remove hooks from engine front lifting eyes.
Remove special tool 303-021 from fender channel.
11. Install Crossbeam to engine Hydramount bolts.
Install bolt securing Hydramount to crossbeam and tighten to 34 - 46 Nm.
Repeat procedure to install crossbeam opposite side bolt.
12. Tighten rear mounting bolt and nut to 131 - 185 Nm.
Repeat procedure to tighten opposite side rear mounting bolt and nut.
