Vanden Plas (X308) V8-4.0L (AJ27) (2000)
5. Install stabilizer bar to crossbeam.
Ensure bushes are correctly positioned on stabilizer bar.
Install support brackets over bushes.
Position stabilizer bar on crossbeam.
Install and tighten bolts to 30 - 40 Nm.
Repeat procedure at opposite end of stabilizer bar.
6. Tighten link arm to stabilizer bar securing nut to 60 - 80 Nm.
Repeat procedure at opposite end of stabilizer bar.
7. Install steering rack on crossbeam.
Ensure that bushes are correctly positioned on steering rack.