Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-897046.png)
Carefully raise crossbeam assembly into position.
Ensure that dowels of both Crossbeam mountings are correctly seated in body locations.
14. Ensure that both engine hydramounts are correctly seated in crossbeam locations.
15. Install crossbeam rear mountings.
Align rear mounting rubber with body location.
Install rear mounting securing bolt and nut and tighten nut to 131 - 185 Nm.
Repeat procedure to install opposite side rear mounting bolt and nut.
