Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-899003.png)
10. Remove and discard tiestrap securing undertray to crossbeam front brace.
11. At each side of vehicle, remove and discard scrivet securing undertray to wheelarch liner.
12. Remove undertray from vehicle.
13. Remove both front road wheels.
14. Remove both front road springs.
15. Disconnect wheel speed sensor harness connectors.
Sever and discard tiestraps securing front wheel speed sensor harness to upper wishbone.
Disconnect harness connector from sensor.
Repeat procedure to disconnect opposite side wheel speed sensor harness.
16. CAUTION: Do not suspend caliper from brake hose as this will damage the hose.
